·
- Eliminate the 4 toner cartridges from the drum unit. Hold the handle of the toner cartridge and haul it out of the drum unit. Rehash this for every one of the toner cartridges.
- There will be four open spaces on the drum unit where the toner cartridges were introduced. Look at the openings and the dark roller in each space for bits of paper or names and eliminate them. Additionally, investigate the right and left sides of the drum unit for bits of paper or marks.
- Turn the drum unit over and check for bits of paper or marks that might be stuck in or on the dark rollers.
- Turn the drum unit back finished and reinstall the toner cartridges. Hold the handles of the toner cartridges and afterward slide them into the drum unit. Ensure you match the toner cartridge tone to a similar shading name on the drum unit. Crease the toner cartridge handles down once the cartridges are set up.
- Hold the green pieces of the belt unit with two hands and lift the belt unit up, then, at that point haul it out. Check the lower part of the belt unit for a paper that might be adhered to the belt surface.
- Eliminate the waste toner box from the printer utilizing the green handle.
- Peer inside the printer, particularly towards the back, for bits of paper or marks. A piece of paper or name might be stuck close to the roller found profound at the lower part of the printer. Check the roller and eliminate any paper or marks in the printer.
- DO NOT use a sharp object to avoid the damage of the roller. It may cause the printing problem.
- DO NOT touch some internal parts shaded in the illustrations. Those parts will be extremely hot after you have used.
